Review iPad Air 4 Screen Replacement,FixCracked iPad air 4 Digitizer Glass,Only for Professional Person,Not Include LCD, PreInstalled Adhesive with Tools ...

phanvvvv

New member
iPad Air 4 Screen Replacement,FixCracked iPad air 4 Digitizer Glass,Only for Professional Person,Not Include LCD, PreInstalled Adhesive with Tools ...

[Đặt Mua Ngay, Rinh Ngay Quà Tặng Đặc Biệt!]: (https://shorten.asia/U3Mr7jhv)
** Thay thế màn hình iPad Air 4: Hướng dẫn cho các chuyên gia **

IPad Air 4 là một máy tính bảng tuyệt vời, nhưng nó không miễn dịch với thiệt hại.Nếu màn hình iPad Air 4 của bạn bị nứt, bạn có thể cần phải thay thế nó.Hướng dẫn này sẽ hướng dẫn bạn qua quá trình thay thế màn hình trên iPad Air 4, để bạn có thể lấy lại máy tính bảng của mình và chạy ngay lập tức.

**Những gì bạn cần:**

* Màn hình iPad Air 4 mới
* Một bộ tua vít chính xác
* Súng nhiệt hoặc máy sấy tóc
* Một cốc hút
* Một người spudger nhựa
* Dung dịch rượu isopropyl 75%
* Một miếng vải không có xơ

** Bước 1: Chuẩn bị iPad Air 4 **

Trước khi bạn bắt đầu, hãy tắt iPad Air 4 và ngắt kết nối nó khỏi mọi nguồn năng lượng.Bạn cũng nên tháo khay thẻ SIM nếu iPad Air 4 có một.

** Bước 2: Tháo nắp sau **

Vỏ mặt sau của iPad Air 4 được giữ tại chỗ bởi một loạt các ốc vít.Sử dụng tua vít chính xác để loại bỏ các ốc vít.

** Bước 3: Tháo đầu nối pin **

Đầu nối pin được đặt ở dưới cùng của iPad Air 4. Sử dụng bộ spudger nhựa để ngắt kết nối pin.

** Bước 4: Tháo cụm hiển thị **

Lắp ráp màn hình được tổ chức tại chỗ bởi một loạt các clip.Sử dụng cốc hút để nâng lắp ráp màn hình.Hãy cẩn thận không làm hỏng các dây cáp kết nối cụm hiển thị với bo mạch chủ.

** Bước 5: Xóa màn hình cũ **

Màn hình cũ được dán vào cụm hiển thị.Sử dụng súng nhiệt hoặc máy sấy tóc để làm mềm chất kết dính.Sau khi chất kết dính được làm mềm, sử dụng spudger nhựa để nâng cao màn hình cũ.Hãy cẩn thận không làm hỏng lắp ráp màn hình.

** Bước 6: Cài đặt màn hình mới **

Căn chỉnh màn hình mới với cụm hiển thị và nhấn xuống chắc chắn để bảo vệ nó tại chỗ.

** Bước 7: REATTACH đầu nối pin **

Kết nối lại đầu nối pin.

** Bước 8: REATTACH Bìa sau **

Thay thế nắp sau và bảo vệ nó bằng các ốc vít.

** Bước 9: Bật iPad Air 4 **

Khi bạn đã hoàn thành tất cả các bước, hãy bật iPad Air 4. Màn hình mới của bạn sẽ hoạt động tốt.

** Hashtags: **

* #ipadair4
* #ScreenReplocation
* #TỰ LÀM LẤY
=======================================
[Đặt Mua Ngay, Rinh Ngay Quà Tặng Đặc Biệt!]: (https://shorten.asia/U3Mr7jhv)
=======================================
**iPad Air 4 Screen Replacement: A Guide for Professionals**

The iPad Air 4 is a great tablet, but it's not immune to damage. If your iPad Air 4 screen is cracked, you may need to replace it. This guide will walk you through the process of replacing the screen on your iPad Air 4, so you can get your tablet back up and running in no time.

**What you'll need:**

* A new iPad Air 4 screen
* A set of precision screwdrivers
* A heat gun or hair dryer
* A suction cup
* A plastic spudger
* A 75% isopropyl alcohol solution
* A lint-free cloth

**Step 1: Prepare your iPad Air 4**

Before you begin, turn off your iPad Air 4 and disconnect it from any power sources. You should also remove the SIM card tray if your iPad Air 4 has one.

**Step 2: Remove the back cover**

The back cover of the iPad Air 4 is held in place by a series of screws. Use the precision screwdrivers to remove the screws.

**Step 3: Remove the battery connector**

The battery connector is located on the bottom of the iPad Air 4. Use the plastic spudger to disconnect the battery connector.

**Step 4: Remove the display assembly**

The display assembly is held in place by a series of clips. Use the suction cup to lift up the display assembly. Be careful not to damage the cables that connect the display assembly to the motherboard.

**Step 5: Remove the old screen**

The old screen is glued to the display assembly. Use the heat gun or hair dryer to soften the adhesive. Once the adhesive is softened, use the plastic spudger to pry up the old screen. Be careful not to damage the display assembly.

**Step 6: Install the new screen**

Align the new screen with the display assembly and press down firmly to secure it in place.

**Step 7: Reattach the battery connector**

Reconnect the battery connector.

**Step 8: Reattach the back cover**

Replace the back cover and secure it with the screws.

**Step 9: Turn on your iPad Air 4**

Once you've completed all of the steps, turn on your iPad Air 4. Your new screen should be working properly.

**Hashtags:**

* #ipadair4
* #screenreplacement
* #DIY
=======================================
[Sản Phẩm Mới Vào - Nhanh Tay Sở Hữu Ngay!]: (https://shorten.asia/U3Mr7jhv)
 
Join Telegram ToolsKiemTrieuDoGroup
Back
Top