cài đặt unbuntu cho máy hp probooks 4410s lỗi âm thanh

tranvytrans

New member
** Ubuntu 9.04 Âm thanh không hoạt động trên HP Probook 4410s **

**Vấn đề**

Sau khi cài đặt Ubuntu 9.04 trên HP Probook 4410S, âm thanh không hoạt động.Biểu tượng âm thanh trong thanh tác vụ có mặt, nhưng không có âm thanh nào được tạo ra.Điều này đúng cho cả đầu ra âm thanh và đầu vào.

**Giải pháp**

Giải pháp là cài đặt gói ** ALSA-UTILS **.Gói này cung cấp một số công cụ để định cấu hình và khắc phục âm thanh trên các hệ thống Linux.Để cài đặt nó, hãy mở một cửa sổ thiết bị đầu cuối và chạy lệnh sau:

`` `
sudo appt-get cài đặt alsa-utils
`` `

Khi gói được cài đặt, bạn có thể sử dụng lệnh ** alsactl ** để định cấu hình thẻ âm thanh.Để xem danh sách các thẻ âm thanh có sẵn, hãy chạy lệnh sau:

`` `
Danh sách alsactl
`` `

Để đặt thẻ âm thanh mặc định, hãy chạy lệnh sau:

`` `
Alsactl Set-Default-Card 0
`` `

Trong đó `0` là chỉ mục của thẻ âm thanh bạn muốn sử dụng.

Để kiểm tra thẻ âm thanh, hãy chạy lệnh sau:

`` `
alsactl -file /etc/asound.conf -c 0 -d mặc định -Q hw: 0,0 play test.wav
`` `

Điều này sẽ phát một tệp âm thanh kiểm tra thông qua thẻ âm thanh mặc định.Nếu bạn có thể nghe thấy âm thanh, thì card âm thanh hoạt động tốt.

**Thông tin thêm**

Để biết thêm thông tin về âm thanh trên Ubuntu, hãy xem các tài nguyên sau:

* [Tài liệu âm thanh Ubuntu] (https://help.ubuntu.com/community/sound)
* [Tài liệu ALSA] (https://alsa-project.org/alsa-doc/)
=======================================
**Ubuntu 9.04 sound not working on HP ProBook 4410s**

**The Problem**

After installing Ubuntu 9.04 on a HP ProBook 4410s, the sound is not working. The sound icon in the taskbar is present, but no sound is produced. This is true for both audio output and input.

**The Solution**

The solution is to install the **alsa-utils** package. This package provides a number of tools for configuring and troubleshooting sound on Linux systems. To install it, open a terminal window and run the following command:

```
sudo apt-get install alsa-utils
```

Once the package is installed, you can use the **alsactl** command to configure the sound card. To see a list of available sound cards, run the following command:

```
alsactl list
```

To set the default sound card, run the following command:

```
alsactl set-default-card 0
```

Where `0` is the index of the sound card you want to use.

To test the sound card, run the following command:

```
alsactl --file /etc/asound.conf -c 0 -D default -q hw:0,0 play test.wav
```

This will play a test sound file through the default sound card. If you can hear the sound, then the sound card is working properly.

**Additional Information**

For more information on sound on Ubuntu, see the following resources:

* [Ubuntu Sound Documentation](https://help.ubuntu.com/community/Sound)
* [ALSA Documentation](https://alsa-project.org/alsa-doc/)
 
Join Telegram ToolsKiemTrieuDoGroup
Back
Top