Review ACDelco Professional 45D1272 Front Driver Side Upper Suspension Control Arm and Ball Joint Assembly

kimcuonglyan

New member
ACDelco Professional 45D1272 Front Driver Side Upper Suspension Control Arm and Ball Joint Assembly

[Sản phẩm này dành riêng cho bạn, đừng bỏ lỡ!]: (https://shorten.asia/fxEmJYvF)
** ACDELCO Professional 45D1272 Bên phía trước Bên phía trên Bộ điều khiển hệ thống treo trên và Bóng khớp **

** Hashtags: ** #Automotive #SUSpension #repair

ACDELCO Professional 45D1272 Front Driver Side Side Control Control và Ball Comples là một phần thay thế cho các phương tiện với các thông số kỹ thuật sau:

*** Làm xe: ** Chevrolet
*** Mô hình xe: ** Silverado 1500
*** Năm xe: ** 2014-2018
*** Động cơ xe: ** 4.3L V6, 5.3L V8, 6.2L V8

Hội đồng này bao gồm cánh tay điều khiển trên, khớp bóng và ống lót.Nó là một sự thay thế trực tiếp cho phần thiết bị gốc và được sản xuất để đáp ứng hoặc vượt quá thông số kỹ thuật OE.Việc lắp ráp được làm từ các vật liệu và xây dựng chất lượng cao, và nó được bảo hành một năm.

**Đặc trưng:**

* Thay thế trực tiếp cho phần thiết bị gốc
* Đáp ứng hoặc vượt quá thông số kỹ thuật OE
* Được làm từ vật liệu chất lượng cao và xây dựng
* Được bảo hành một năm

**Những lợi ích:**

* Xử lý và hiệu suất được cải thiện
* Giảm tiếng ồn và độ rung của đường
* Tăng an toàn

**Cài đặt:**

ACDELCO Professional 45D1272 Front Driver Side Side Control Control ARM và BALL KEMBLY có thể được cài đặt bởi một thợ máy đủ điều kiện.Các bước sau đây chỉ được cung cấp để tham khảo chung:

1. Tháo bánh xe và lắp ráp lốp.
2. Tháo bu lông cánh tay điều khiển trên.
3. Tháo đai ốc bóng.
4. Tháo khớp bóng khỏi đốt ngón tay.
5. Cài đặt khớp bóng mới vào đốt ngón tay.
6. Cài đặt bu lông cánh tay điều khiển trên mới.
7. Cài đặt đai ốc chung bóng mới.
8. Cài đặt lại bánh xe và lắp ráp lốp.

** Ghi chú: **

* Trước khi cài đặt lắp ráp mới, hãy kiểm tra Knuckle lái để bị hư hại.Nếu đốt ngón tay bị hỏng, nó phải được thay thế trước khi lắp ráp có thể được cài đặt.
* Đảm bảo rằng lắp ráp mới được cài đặt chính xác.Nếu lắp ráp không được cài đặt chính xác, nó có thể gây ra thiệt hại cho xe.
* Nếu bạn không thoải mái thực hiện sửa chữa này, hãy có một thợ máy đủ điều kiện làm điều đó cho bạn.
=======================================
[Sản phẩm này dành riêng cho bạn, đừng bỏ lỡ!]: (https://shorten.asia/fxEmJYvF)
=======================================
**Acdelco Professional 45D1272 Front Driver Side Side Upper Suspension Control ARM and Ball Joint Assembly**

**Hashtags:** #Automotive #SUSpension #repair

The Acdelco Professional 45D1272 Front Driver Side Side Upper Suspension Control ARM and Ball Joint Assembly is a replacement part for vehicles with the following specifications:

* **Vehicle Make:** Chevrolet
* **Vehicle Model:** Silverado 1500
* **Vehicle Year:** 2014-2018
* **Vehicle Engine:** 4.3L V6, 5.3L V8, 6.2L V8

This assembly includes the upper control arm, ball joint, and bushing. It is a direct replacement for the original equipment part and is manufactured to meet or exceed OE specifications. The assembly is made from high-quality materials and construction, and it is backed by a one-year warranty.

**Features:**

* Direct replacement for original equipment part
* Meets or exceeds OE specifications
* Made from high-quality materials and construction
* Backed by a one-year warranty

**Benefits:**

* Improved handling and performance
* Reduced road noise and vibration
* Increased safety

**Installation:**

The Acdelco Professional 45D1272 Front Driver Side Side Upper Suspension Control ARM and Ball Joint Assembly can be installed by a qualified mechanic. The following steps are provided for general reference only:

1. Remove the wheel and tire assembly.
2. Remove the upper control arm bolt.
3. Remove the ball joint nut.
4. Remove the ball joint from the steering knuckle.
5. Install the new ball joint into the steering knuckle.
6. Install the new upper control arm bolt.
7. Install the new ball joint nut.
8. Reinstall the wheel and tire assembly.

**Notes:**

* Before installing the new assembly, inspect the steering knuckle for damage. If the steering knuckle is damaged, it must be replaced before the assembly can be installed.
* Make sure that the new assembly is installed correctly. If the assembly is not installed correctly, it could cause damage to the vehicle.
* If you are not comfortable performing this repair, have a qualified mechanic do it for you.
=======================================
[Đừng Bỏ Lỡ Sản Phẩm Hot Nhất - Số Lượng Có Hạn!]: (https://shorten.asia/fxEmJYvF)
 
Join Telegram ToolsKiemTrieuDoGroup
Back
Top