Review Waste King L-1001 Garbage Disposal with Power Cord, 1/2 HP & 1025 EZ Mount Garbage Disposal Stopper and Splash Guard, Black

uyenphuong359

New member
Waste King L-1001 Garbage Disposal with Power Cord, 1/2 HP & 1025 EZ Mount Garbage Disposal Stopper and Splash Guard, Black

[Đây là sản phẩm chất lượng nhất hiện nay, bạn không nên bỏ lỡ!]: (https://shorten.asia/baJ9f64x)
** Cách cài đặt xử lý rác thải King King L-101 **

** hashtags: ** #garbage xử lý #Waste vua #DIY

Chất thải King L-101 là một loại bỏ rác mạnh mẽ và hiệu quả, có thể xử lý tất cả chất thải thực phẩm của bạn.Thật dễ dàng để cài đặt, ngay cả đối với người mới bắt đầu, và nó đi kèm với nhiều tính năng khác nhau làm cho nó trở thành một lựa chọn tuyệt vời cho bất kỳ ngôi nhà nào.

** Để cài đặt chất thải King L-101, bạn sẽ cần: **

* Xử lý rác thải L-101
* Một bồn rửa với cống thải rác thải
* Dây nguồn
* Một tuốc nơ vít
* Mốt cái mỏ lết
* Băng ống nước
* Một cái xô
* Một miếng giẻ ướt

**Hướng dẫn:**

1. ** Tắt nguồn cho xử lý rác. ** Điều này có thể được thực hiện bằng cách tắt bộ ngắt tại bảng điện chính hoặc bằng cách rút phích cắm từ đầu ra tường.
2. ** Ngắt kết nối xử lý rác cũ. ** Nếu bạn đang thay thế xử lý rác hiện có, bạn sẽ cần ngắt kết nối xử lý cũ khỏi cống chìm và dây nguồn.
3. ** Cài đặt xử lý rác mới. ** Để cài đặt xử lý mới, trước tiên hãy gắn dây nguồn vào xử lý.Sau đó, đặt xử lý trong cống bồn rửa và siết chặt các ốc vít lắp.
4. ** Kết nối xử lý rác với cống bồn rửa. ** Sử dụng putty của thợ sửa ống nước để niêm phong kết nối giữa xử lý và cống bồn rửa.
5. ** Bật nguồn cho xử lý rác. ** Khi xử lý được kết nối với nguồn điện, bạn có thể bật nguồn và kiểm tra nó.

**Lời khuyên:**

* Khi cài đặt xử lý rác, hãy đảm bảo rằng việc xử lý là cấp độ.Điều này sẽ giúp ngăn ngừa rò rỉ và đảm bảo rằng việc xử lý hoạt động đúng.
* Sử dụng putty của thợ sửa ống nước để niêm phong kết nối giữa xử lý và cống bồn rửa.Điều này sẽ giúp ngăn ngừa rò rỉ.
* Kiểm tra xử lý rác trước khi bạn sử dụng nó để đảm bảo rằng nó hoạt động tốt.

** Dưới đây là một số tài nguyên bổ sung mà bạn có thể thấy hữu ích: **

* [Waste King L-101 Hướng dẫn sử dụng xử lý rác] (https://www.wasteking.com/manuals/l-101- garbage-disposal-user-manual/)
* [Cách cài đặt xử lý rác] (https://www.homedepot.com/c/how-to-install-a- garbage-disposal-hbsd010018)
* [Mẹo xử lý rác] (https://www.thespruceeats.com/garbage-disposal-tips-4170288)
=======================================
[Đây là sản phẩm chất lượng nhất hiện nay, bạn không nên bỏ lỡ!]: (https://shorten.asia/baJ9f64x)
=======================================
**How to Install a Waste King L-101 Garbage Disposal**

**Hashtags:** #garbage disposal #Waste king #DIY

The Waste King L-101 is a powerful and efficient garbage disposal that can handle all of your food waste. It's easy to install, even for beginners, and it comes with a variety of features that make it a great choice for any home.

**To install the Waste King L-101, you will need:**

* The Waste King L-101 garbage disposal
* A sink with a garbage disposal drain
* A power cord
* A screwdriver
* A wrench
* Plumbing tape
* A bucket
* A wet rag

**Instructions:**

1. **Turn off the power to the garbage disposal.** This can be done by turning off the breaker at the main electrical panel or by unplugging the disposal from the wall outlet.
2. **Disconnect the old garbage disposal.** If you are replacing an existing garbage disposal, you will need to disconnect the old disposal from the sink drain and the power cord.
3. **Install the new garbage disposal.** To install the new disposal, first attach the power cord to the disposal. Then, place the disposal in the sink drain and tighten the mounting screws.
4. **Connect the garbage disposal to the sink drain.** Use a plumber's putty to seal the connection between the disposal and the sink drain.
5. **Turn on the power to the garbage disposal.** Once the disposal is connected to the power, you can turn on the power and test it out.

**Tips:**

* When installing the garbage disposal, make sure that the disposal is level. This will help to prevent leaks and ensure that the disposal works properly.
* Use plumber's putty to seal the connection between the disposal and the sink drain. This will help to prevent leaks.
* Test the garbage disposal before you use it to make sure that it is working properly.

**Here are some additional resources that you may find helpful:**

* [Waste King L-101 Garbage Disposal User Manual](https://www.wasteking.com/manuals/l-101-garbage-disposal-user-manual/)
* [How to Install a Garbage Disposal](https://www.homedepot.com/c/how-to-install-a-garbage-disposal-hbsd010018)
* [Garbage Disposal Tips](https://www.thespruceeats.com/garbage-disposal-tips-4170288)
=======================================
[Sản Phẩm Chất Lượng Nhất - Đừng Bỏ Lỡ Cơ Hội Này!]: (https://shorten.asia/baJ9f64x)
 
Join Telegram ToolsKiemTrieuDoGroup
Back
Top