yellowswan833
New member
#vb.net #if #between #Values #Comparison
** vb.net nếu các giá trị nằm giữa 2 giá trị thì **
Câu lệnh `if` trong vb.net được sử dụng để kiểm tra một điều kiện và thực thi mã nếu điều kiện là đúng.Bạn có thể sử dụng toán tử `giữa` để kiểm tra xem giá trị có nằm giữa hai giá trị khác không.
Cú pháp cho câu lệnh `if` với toán tử` giữa` như sau:
`` `
Nếu biểu thức1 giữa biểu thức2 và biểu thức3 thì
các câu lệnh
Kết thúc nếu
`` `
Ở đâu:
* `Biểu thức1` là giá trị cần kiểm tra.
* `expression2` là giới hạn dưới của phạm vi.
* `expression3` là giới hạn trên của phạm vi.
Nếu giá trị của `expression1` nằm giữa` expression2` và `expression3`, câu lệnh` if` sẽ thực thi khối `falgement`.
Ví dụ: mã sau kiểm tra xem giá trị của biến `number` nằm trong khoảng từ 10 đến 20:
`` `
Số Dim As Integer = 15
Nếu số từ 10 đến 20 thì
Console.WriteLine ("Số nằm trong khoảng từ 10 đến 20.")
Kết thúc nếu
`` `
Mã này sẽ in đầu ra sau vào bảng điều khiển:
`` `
Số lượng là từ 10 đến 20.
`` `
Bạn cũng có thể sử dụng toán tử `not` để kiểm tra xem giá trị không nằm giữa hai giá trị khác.Cú pháp cho câu lệnh `if` với toán tử` not` và toán tử `giữa` như sau:
`` `
Nếu không biểu thức1 giữa biểu thức2 và biểu thức3 thì
các câu lệnh
Kết thúc nếu
`` `
Ví dụ: mã sau kiểm tra xem giá trị của biến `number` không nằm trong khoảng từ 10 đến 20:
`` `
Số Dim As Integer = 15
Nếu không số từ 10 đến 20 thì
Console.WriteLine ("Số không nằm trong khoảng từ 10 đến 20.")
Kết thúc nếu
`` `
Mã này sẽ in đầu ra sau vào bảng điều khiển:
`` `
Số lượng không nằm trong khoảng từ 10 đến 20.
`` `
## 5 hashtag ở dạng #
* #vb.net
* #Nếu như
* #giữa
* #Values
* #Comparison
=======================================
#vb.net #If #between #Values #Comparison
**VB.NET If Values is Between 2 Values Then**
The `If` statement in VB.NET is used to check a condition and execute code if the condition is true. You can use the `Between` operator to check if a value is between two other values.
The syntax for the `If` statement with the `Between` operator is as follows:
```
If expression1 Between expression2 And expression3 Then
statements
End If
```
where:
* `expression1` is the value to be checked.
* `expression2` is the lower bound of the range.
* `expression3` is the upper bound of the range.
If the value of `expression1` is between `expression2` and `expression3`, the `If` statement will execute the `statements` block.
For example, the following code checks if the value of the `number` variable is between 10 and 20:
```
Dim number As Integer = 15
If number Between 10 And 20 Then
Console.WriteLine("The number is between 10 and 20.")
End If
```
This code will print the following output to the console:
```
The number is between 10 and 20.
```
You can also use the `Not` operator to check if a value is not between two other values. The syntax for the `If` statement with the `Not` operator and the `Between` operator is as follows:
```
If Not expression1 Between expression2 And expression3 Then
statements
End If
```
For example, the following code checks if the value of the `number` variable is not between 10 and 20:
```
Dim number As Integer = 15
If Not number Between 10 And 20 Then
Console.WriteLine("The number is not between 10 and 20.")
End If
```
This code will print the following output to the console:
```
The number is not between 10 and 20.
```
## 5 Hashtags in the form of #
* #vb.net
* #If
* #between
* #Values
* #Comparison
** vb.net nếu các giá trị nằm giữa 2 giá trị thì **
Câu lệnh `if` trong vb.net được sử dụng để kiểm tra một điều kiện và thực thi mã nếu điều kiện là đúng.Bạn có thể sử dụng toán tử `giữa` để kiểm tra xem giá trị có nằm giữa hai giá trị khác không.
Cú pháp cho câu lệnh `if` với toán tử` giữa` như sau:
`` `
Nếu biểu thức1 giữa biểu thức2 và biểu thức3 thì
các câu lệnh
Kết thúc nếu
`` `
Ở đâu:
* `Biểu thức1` là giá trị cần kiểm tra.
* `expression2` là giới hạn dưới của phạm vi.
* `expression3` là giới hạn trên của phạm vi.
Nếu giá trị của `expression1` nằm giữa` expression2` và `expression3`, câu lệnh` if` sẽ thực thi khối `falgement`.
Ví dụ: mã sau kiểm tra xem giá trị của biến `number` nằm trong khoảng từ 10 đến 20:
`` `
Số Dim As Integer = 15
Nếu số từ 10 đến 20 thì
Console.WriteLine ("Số nằm trong khoảng từ 10 đến 20.")
Kết thúc nếu
`` `
Mã này sẽ in đầu ra sau vào bảng điều khiển:
`` `
Số lượng là từ 10 đến 20.
`` `
Bạn cũng có thể sử dụng toán tử `not` để kiểm tra xem giá trị không nằm giữa hai giá trị khác.Cú pháp cho câu lệnh `if` với toán tử` not` và toán tử `giữa` như sau:
`` `
Nếu không biểu thức1 giữa biểu thức2 và biểu thức3 thì
các câu lệnh
Kết thúc nếu
`` `
Ví dụ: mã sau kiểm tra xem giá trị của biến `number` không nằm trong khoảng từ 10 đến 20:
`` `
Số Dim As Integer = 15
Nếu không số từ 10 đến 20 thì
Console.WriteLine ("Số không nằm trong khoảng từ 10 đến 20.")
Kết thúc nếu
`` `
Mã này sẽ in đầu ra sau vào bảng điều khiển:
`` `
Số lượng không nằm trong khoảng từ 10 đến 20.
`` `
## 5 hashtag ở dạng #
* #vb.net
* #Nếu như
* #giữa
* #Values
* #Comparison
=======================================
#vb.net #If #between #Values #Comparison
**VB.NET If Values is Between 2 Values Then**
The `If` statement in VB.NET is used to check a condition and execute code if the condition is true. You can use the `Between` operator to check if a value is between two other values.
The syntax for the `If` statement with the `Between` operator is as follows:
```
If expression1 Between expression2 And expression3 Then
statements
End If
```
where:
* `expression1` is the value to be checked.
* `expression2` is the lower bound of the range.
* `expression3` is the upper bound of the range.
If the value of `expression1` is between `expression2` and `expression3`, the `If` statement will execute the `statements` block.
For example, the following code checks if the value of the `number` variable is between 10 and 20:
```
Dim number As Integer = 15
If number Between 10 And 20 Then
Console.WriteLine("The number is between 10 and 20.")
End If
```
This code will print the following output to the console:
```
The number is between 10 and 20.
```
You can also use the `Not` operator to check if a value is not between two other values. The syntax for the `If` statement with the `Not` operator and the `Between` operator is as follows:
```
If Not expression1 Between expression2 And expression3 Then
statements
End If
```
For example, the following code checks if the value of the `number` variable is not between 10 and 20:
```
Dim number As Integer = 15
If Not number Between 10 And 20 Then
Console.WriteLine("The number is not between 10 and 20.")
End If
```
This code will print the following output to the console:
```
The number is not between 10 and 20.
```
## 5 Hashtags in the form of #
* #vb.net
* #If
* #between
* #Values
* #Comparison