Review UHPPOTE Middle Reading Distance Range (Up to 40") Wiegand 26-bit 125KHz Card Reader for Access Control Parking System

UHPPOTE Middle Reading Distance Range (Up to 40") Wiegand 26-bit 125KHz Card Reader for Access Control Parking System

[Đừng Bỏ Lỡ Sản Phẩm Hot Nhất Hiện Nay - Mua Ngay!]: (https://shorten.asia/na39Puxe)
** Cách chọn đầu đọc thẻ Wiegand tốt nhất cho hệ thống điều khiển truy cập của bạn **

**Giới thiệu**

Đầu đọc thẻ Wiegand là một thiết bị đọc thẻ Wiegand, là một loại thẻ gần sử dụng mã duy nhất để xác định chủ thẻ.Người đọc thẻ Wiegand thường được sử dụng trong các hệ thống kiểm soát truy cập để cấp hoặc từ chối quyền truy cập vào một cơ sở.

Khi chọn đầu đọc thẻ Wiegand cho hệ thống kiểm soát truy cập của bạn, có một vài yếu tố bạn cần xem xét, bao gồm:

*** Khoảng cách đọc: ** Khoảng cách đọc của đầu đọc thẻ Wiegand là khoảng cách tối đa mà người đọc có thể đọc thẻ.Điều này rất quan trọng để xem xét nếu bạn cần có khả năng đọc thẻ từ xa, chẳng hạn như tại cổng đỗ xe hoặc trạm kiểm soát bảo mật.
*** Số lượng kênh Wiegand: ** Số lượng kênh Wiegand đề cập đến số lượng thẻ mà người đọc có thể đọc đồng thời.Điều này rất quan trọng nếu bạn cần có khả năng đọc nhiều thẻ cùng một lúc, chẳng hạn như trong một khu vực giao thông cao.
*** Giao thức Wiegand: ** Giao thức Wiegand là giao thức truyền dữ liệu được sử dụng bởi độc giả thẻ Wiegand.Có hai giao thức Wiegand chính: Wiegand 26 và Wiegand 34. Wiegand 26 là giao thức cũ hơn và hỗ trợ độ dài thẻ tối đa là 26 bit.Wiegand 34 là giao thức mới hơn và hỗ trợ chiều dài thẻ tối đa là 34 bit.

** Chọn đầu đọc thẻ Wiegand phù hợp với nhu cầu của bạn **

Khi bạn đã xem xét các yếu tố ở trên, bạn có thể chọn đầu đọc thẻ Wiegand phù hợp với nhu cầu của bạn.Dưới đây là một vài trong số những người đọc thẻ Wiegand tốt nhất trên thị trường:

*** Phạm vi khoảng cách đọc giữa uhppote (lên đến 40 ") Wiegand 26-bit 125kHz Trình đọc thẻ cho hệ thống đỗ xe điều khiển truy cập ** Trình đọc thẻ Wiegand này có khoảng cách đọc lên tới 40 inch và hỗ trợ thẻ Wiegand 26.Nó là hoàn hảo để sử dụng trong các hệ thống đỗ xe, các điểm kiểm tra bảo mật và các ứng dụng khác mà thẻ cần được đọc từ xa.
*** HID Proxcard II Wiegand 26-bit 125kHz đầu đọc thẻ ** Trình đọc thẻ Wiegand này là một lựa chọn phổ biến cho các hệ thống kiểm soát truy cập.Nó tương thích với một loạt các thẻ Wiegand 26 và hỗ trợ khoảng cách đọc lên đến 3 feet.
*** Suprema XR-100 Wiegand 26-bit 125kHz đầu đọc thẻ ** Trình đọc thẻ Wiegand này là một lựa chọn tốt cho các khách hàng có ngân sách.Nó tương thích với các thẻ Wiegand 26 và hỗ trợ khoảng cách đọc lên đến 3 feet.

** hashtags **

* #WieGandCardReader
* #kiểm soát truy cập
* #ParkingSystem
=======================================
[Đừng Bỏ Lỡ Sản Phẩm Hot Nhất Hiện Nay - Mua Ngay!]: (https://shorten.asia/na39Puxe)
=======================================
**How to Choose the Best Wiegand Card Reader for Your Access Control System**

**Introduction**

A Wiegand card reader is a device that reads Wiegand cards, which are a type of proximity card that uses a unique code to identify the cardholder. Wiegand card readers are commonly used in access control systems to grant or deny access to a facility.

When choosing a Wiegand card reader for your access control system, there are a few factors you need to consider, including:

* **Reading distance:** The reading distance of a Wiegand card reader is the maximum distance at which the reader can read a card. This is important to consider if you need to be able to read cards from a distance, such as at a parking gate or a security checkpoint.
* **Number of Wiegand channels:** The number of Wiegand channels refers to the number of cards that the reader can read simultaneously. This is important if you need to be able to read multiple cards at the same time, such as in a high-traffic area.
* **Wiegand protocol:** The Wiegand protocol is the data transmission protocol used by Wiegand card readers. There are two main Wiegand protocols: Wiegand 26 and Wiegand 34. Wiegand 26 is the older protocol and supports a maximum card length of 26 bits. Wiegand 34 is the newer protocol and supports a maximum card length of 34 bits.

**Choosing the Right Wiegand Card Reader for Your Needs**

Once you have considered the factors above, you can choose the right Wiegand card reader for your needs. Here are a few of the best Wiegand card readers on the market:

* **Uhppote Middle Reading Distance Range (Up to 40") Wiegand 26-Bit 125kHz Card Reader for Access Control Parking System** This Wiegand card reader has a reading distance of up to 40 inches and supports Wiegand 26 cards. It is perfect for use in parking systems, security checkpoints, and other applications where cards need to be read from a distance.
* **HID ProxCard II Wiegand 26-Bit 125kHz Card Reader** This Wiegand card reader is a popular choice for access control systems. It is compatible with a wide range of Wiegand 26 cards and supports a reading distance of up to 3 feet.
* **Suprema XR-100 Wiegand 26-Bit 125kHz Card Reader** This Wiegand card reader is a good option for budget-minded customers. It is compatible with Wiegand 26 cards and supports a reading distance of up to 3 feet.

**Hashtags**

* #WieGandCardReader
* #AccessControl
* #ParkingSystem
=======================================
[Chương trình ưu đãi đặc biệt, tặng ngay voucher trị giá 1 triệu đồng khi mua sản phẩm này]: (https://shorten.asia/na39Puxe)
 
Join Telegram ToolsKiemTrieuDoGroup
Back
Top