hongliem511
New member
## Number to String C ++
[Liên kết đến một bài viết tham chiếu] (https://www.tutorialspoint.com/cpp/cpp_convert_number_to_string.htm)
C ++ cung cấp một số cách để chuyển đổi một số thành một chuỗi.Sau đây là một số phương pháp phổ biến nhất:
*** Sử dụng hàm `to_String ()` **
Hàm `to_String ()` là hàm tích hợp trong C ++ có thể được sử dụng để chuyển đổi một số thành một chuỗi.Cú pháp của hàm `to_String ()` như sau:
`` `C ++
std :: chuỗi to_String (số int);
`` `
trong đó `Số` là số sẽ được chuyển đổi.
Ví dụ: mã sau đây chuyển đổi số 123 thành chuỗi:
`` `C ++
std :: chuỗi str = std :: to_string (123);
`` `
*** Sử dụng lớp `stringstream` **
Lớp `StringStream` là một lớp luồng có thể được sử dụng để chuyển đổi một số thành một chuỗi.Cú pháp của lớp `stringstream` như sau:
`` `C ++
std :: Stringstream ss;
`` `
Để chuyển đổi một số thành một chuỗi bằng lớp `stringstream`, bạn có thể sử dụng các bước sau:
1. Tạo đối tượng `StringStream`.
2. Chèn số vào đối tượng `StringStream`.
3. Lấy chuỗi từ đối tượng `StringStream`.
Ví dụ: mã sau đây chuyển đổi số 123 thành chuỗi:
`` `C ++
std :: Stringstream ss;
SS << 123;
std :: chuỗi str = ss.str ();
`` `
*** Sử dụng chức năng `itoa ()` **
Hàm `itoa ()` là hàm di sản có thể được sử dụng để chuyển đổi một số thành một chuỗi.Cú pháp của hàm `itoa ()` như sau:
`` `C ++
char* itoa (giá trị int, bộ đệm char*, int radix);
`` `
Trong đó `value` là số sẽ được chuyển đổi,` bộ đệm` là bộ đệm nơi chuỗi sẽ được lưu trữ và `radix` là radix của số.
Ví dụ: mã sau đây chuyển đổi số 123 thành chuỗi trong cơ sở 10:
`` `C ++
bộ đệm char [10];
ITOA (123, bộ đệm, 10);
std :: chuỗi str = bộ đệm;
`` `
*** Sử dụng hàm `strtol ()` **
Hàm `strtol ()` là hàm di sản có thể được sử dụng để chuyển đổi một chuỗi thành một số.Cú pháp của hàm `strtol ()` như sau:
`` `C ++
long int strtol (const char* str, char ** endptr, int cơ sở);
`` `
Trong đó `str` là chuỗi được chuyển đổi,` endptr` là một con trỏ tới ký tự sau chữ số được chuyển đổi cuối cùng và `base` là radix của số.
Ví dụ: mã sau đây chuyển đổi chuỗi "123" thành một số trong cơ sở 10:
`` `C ++
char str [] = "123";
dài số int = strtol (str, null, 10);
`` `
## hashtags
* #C ++
* #Number to String
* #sợi dây
* #Conversion
* #Programming
=======================================
## Number to string C++
[Link to a reference article](https://www.tutorialspoint.com/cpp/cpp_convert_number_to_string.htm)
C++ provides several ways to convert a number to a string. The following are some of the most common methods:
* **Using the `to_string()` function**
The `to_string()` function is a built-in function in C++ that can be used to convert a number to a string. The syntax of the `to_string()` function is as follows:
```c++
std::string to_string(int number);
```
where `number` is the number to be converted.
For example, the following code converts the number 123 to a string:
```c++
std::string str = std::to_string(123);
```
* **Using the `stringstream` class**
The `stringstream` class is a stream class that can be used to convert a number to a string. The syntax of the `stringstream` class is as follows:
```c++
std::stringstream ss;
```
To convert a number to a string using the `stringstream` class, you can use the following steps:
1. Create a `stringstream` object.
2. Insert the number into the `stringstream` object.
3. Get the string from the `stringstream` object.
For example, the following code converts the number 123 to a string:
```c++
std::stringstream ss;
ss << 123;
std::string str = ss.str();
```
* **Using the `itoa()` function**
The `itoa()` function is a legacy function that can be used to convert a number to a string. The syntax of the `itoa()` function is as follows:
```c++
char* itoa(int value, char* buffer, int radix);
```
where `value` is the number to be converted, `buffer` is the buffer where the string will be stored, and `radix` is the radix of the number.
For example, the following code converts the number 123 to a string in base 10:
```c++
char buffer[10];
itoa(123, buffer, 10);
std::string str = buffer;
```
* **Using the `strtol()` function**
The `strtol()` function is a legacy function that can be used to convert a string to a number. The syntax of the `strtol()` function is as follows:
```c++
long int strtol(const char* str, char** endptr, int base);
```
where `str` is the string to be converted, `endptr` is a pointer to the character after the last converted digit, and `base` is the radix of the number.
For example, the following code converts the string "123" to a number in base 10:
```c++
char str[] = "123";
long int number = strtol(str, NULL, 10);
```
## Hashtags
* #C++
* #Number to string
* #String
* #Conversion
* #Programming
[Liên kết đến một bài viết tham chiếu] (https://www.tutorialspoint.com/cpp/cpp_convert_number_to_string.htm)
C ++ cung cấp một số cách để chuyển đổi một số thành một chuỗi.Sau đây là một số phương pháp phổ biến nhất:
*** Sử dụng hàm `to_String ()` **
Hàm `to_String ()` là hàm tích hợp trong C ++ có thể được sử dụng để chuyển đổi một số thành một chuỗi.Cú pháp của hàm `to_String ()` như sau:
`` `C ++
std :: chuỗi to_String (số int);
`` `
trong đó `Số` là số sẽ được chuyển đổi.
Ví dụ: mã sau đây chuyển đổi số 123 thành chuỗi:
`` `C ++
std :: chuỗi str = std :: to_string (123);
`` `
*** Sử dụng lớp `stringstream` **
Lớp `StringStream` là một lớp luồng có thể được sử dụng để chuyển đổi một số thành một chuỗi.Cú pháp của lớp `stringstream` như sau:
`` `C ++
std :: Stringstream ss;
`` `
Để chuyển đổi một số thành một chuỗi bằng lớp `stringstream`, bạn có thể sử dụng các bước sau:
1. Tạo đối tượng `StringStream`.
2. Chèn số vào đối tượng `StringStream`.
3. Lấy chuỗi từ đối tượng `StringStream`.
Ví dụ: mã sau đây chuyển đổi số 123 thành chuỗi:
`` `C ++
std :: Stringstream ss;
SS << 123;
std :: chuỗi str = ss.str ();
`` `
*** Sử dụng chức năng `itoa ()` **
Hàm `itoa ()` là hàm di sản có thể được sử dụng để chuyển đổi một số thành một chuỗi.Cú pháp của hàm `itoa ()` như sau:
`` `C ++
char* itoa (giá trị int, bộ đệm char*, int radix);
`` `
Trong đó `value` là số sẽ được chuyển đổi,` bộ đệm` là bộ đệm nơi chuỗi sẽ được lưu trữ và `radix` là radix của số.
Ví dụ: mã sau đây chuyển đổi số 123 thành chuỗi trong cơ sở 10:
`` `C ++
bộ đệm char [10];
ITOA (123, bộ đệm, 10);
std :: chuỗi str = bộ đệm;
`` `
*** Sử dụng hàm `strtol ()` **
Hàm `strtol ()` là hàm di sản có thể được sử dụng để chuyển đổi một chuỗi thành một số.Cú pháp của hàm `strtol ()` như sau:
`` `C ++
long int strtol (const char* str, char ** endptr, int cơ sở);
`` `
Trong đó `str` là chuỗi được chuyển đổi,` endptr` là một con trỏ tới ký tự sau chữ số được chuyển đổi cuối cùng và `base` là radix của số.
Ví dụ: mã sau đây chuyển đổi chuỗi "123" thành một số trong cơ sở 10:
`` `C ++
char str [] = "123";
dài số int = strtol (str, null, 10);
`` `
## hashtags
* #C ++
* #Number to String
* #sợi dây
* #Conversion
* #Programming
=======================================
## Number to string C++
[Link to a reference article](https://www.tutorialspoint.com/cpp/cpp_convert_number_to_string.htm)
C++ provides several ways to convert a number to a string. The following are some of the most common methods:
* **Using the `to_string()` function**
The `to_string()` function is a built-in function in C++ that can be used to convert a number to a string. The syntax of the `to_string()` function is as follows:
```c++
std::string to_string(int number);
```
where `number` is the number to be converted.
For example, the following code converts the number 123 to a string:
```c++
std::string str = std::to_string(123);
```
* **Using the `stringstream` class**
The `stringstream` class is a stream class that can be used to convert a number to a string. The syntax of the `stringstream` class is as follows:
```c++
std::stringstream ss;
```
To convert a number to a string using the `stringstream` class, you can use the following steps:
1. Create a `stringstream` object.
2. Insert the number into the `stringstream` object.
3. Get the string from the `stringstream` object.
For example, the following code converts the number 123 to a string:
```c++
std::stringstream ss;
ss << 123;
std::string str = ss.str();
```
* **Using the `itoa()` function**
The `itoa()` function is a legacy function that can be used to convert a number to a string. The syntax of the `itoa()` function is as follows:
```c++
char* itoa(int value, char* buffer, int radix);
```
where `value` is the number to be converted, `buffer` is the buffer where the string will be stored, and `radix` is the radix of the number.
For example, the following code converts the number 123 to a string in base 10:
```c++
char buffer[10];
itoa(123, buffer, 10);
std::string str = buffer;
```
* **Using the `strtol()` function**
The `strtol()` function is a legacy function that can be used to convert a string to a number. The syntax of the `strtol()` function is as follows:
```c++
long int strtol(const char* str, char** endptr, int base);
```
where `str` is the string to be converted, `endptr` is a pointer to the character after the last converted digit, and `base` is the radix of the number.
For example, the following code converts the string "123" to a number in base 10:
```c++
char str[] = "123";
long int number = strtol(str, NULL, 10);
```
## Hashtags
* #C++
* #Number to string
* #String
* #Conversion
* #Programming