#calculator #VBNET #VisualBasic #StepByStep #tutorial ## Máy tính bằng VB.NET - Từng bước
**Giới thiệu**
Trong hướng dẫn này, chúng tôi sẽ tìm hiểu cách tạo một máy tính đơn giản bằng VB.NET.Chúng tôi sẽ đề cập đến các chủ đề sau:
* Tạo một dự án mới
* Thêm điều khiển vào biểu mẫu
* Mã hóa chức năng của máy tính
* Chạy máy tính
** Tạo một dự án mới **
Để tạo một dự án mới, hãy mở Visual Studio và chọn tệp ** **> ** MỚI **> ** Dự án **.Trong hộp thoại ** New Project **, chọn ** Visual Basic **> ** Ứng dụng Windows Forms ** và nhấp vào ** OK **.
Điều này sẽ tạo ra một dự án mới có tên ** Máy tính **.Dự án sẽ chứa một biểu mẫu duy nhất gọi là ** Form1 **.
** Thêm điều khiển vào biểu mẫu **
Bước tiếp theo là thêm các điều khiển vào biểu mẫu mà chúng ta cần cho máy tính.Chúng tôi sẽ cần các điều khiển sau:
* Một điều khiển nhãn để hiển thị kết quả của phép tính
* Một điều khiển hộp văn bản để nhập các số
* Điều khiển nút để thực hiện tính toán
Để thêm điều khiển vào biểu mẫu, hãy kéo nó từ hộp công cụ ** ** vào biểu mẫu.
** Mã hóa chức năng của máy tính **
Bước tiếp theo là mã hóa chức năng của máy tính.Chúng ta sẽ cần viết mã cho các sự kiện sau:
*Nhấp vào ** sự kiện của nút ** ** điều khiển
*Sự kiện ** textChanged ** của điều khiển hộp văn bản ** **
Mã cho sự kiện ** Nhấp vào ** của nút ** ** điều khiển sẽ thực hiện tính toán và cập nhật điều khiển nhãn ** ** với kết quả.Mã cho sự kiện ** TextChanged ** của điều khiển TextBox ** ** sẽ kiểm tra xem người dùng đã nhập một số hợp lệ và sẽ bật hoặc vô hiệu hóa nút ** ** điều khiển phù hợp.
** Chạy máy tính **
Khi bạn đã hoàn thành mã hóa máy tính, bạn có thể chạy nó bằng cách nhấn ** F5 **.Máy tính sẽ được hiển thị trong một cửa sổ mới.Bạn có thể nhập số vào điều khiển ** Textbox ** và nhấp vào nút ** ** Điều khiển để thực hiện tính toán.
**Phần kết luận**
Trong hướng dẫn này, chúng tôi đã học cách tạo một máy tính đơn giản bằng VB.NET.Chúng tôi đề cập đến các chủ đề sau:
* Tạo một dự án mới
* Thêm điều khiển vào biểu mẫu
* Mã hóa chức năng của máy tính
* Chạy máy tính
Tôi hy vọng bạn tìm thấy hướng dẫn này hữu ích.Nếu bạn có bất kỳ câu hỏi, xin vui lòng hỏi trong các ý kiến dưới đây.
## hashtags
* #máy tính
* #VBNET
* #ngôn ngữ lập trình
* #từng bước một
* #tutorial
=======================================
#calculator #VBNET #VisualBasic #StepByStep #tutorial ## Calculator using vb.net - Step by step
**Introduction**
In this tutorial, we will learn how to create a simple calculator using vb.net. We will cover the following topics:
* Creating a new project
* Adding controls to the form
* Coding the calculator's functionality
* Running the calculator
**Creating a new project**
To create a new project, open Visual Studio and select **File** > **New** > **Project**. In the **New Project** dialog box, select **Visual Basic** > **Windows Forms Application** and click **OK**.
This will create a new project called **Calculator**. The project will contain a single form called **Form1**.
**Adding controls to the form**
The next step is to add the controls to the form that we need for the calculator. We will need the following controls:
* A Label control to display the result of the calculation
* A TextBox control to enter the numbers
* A Button control to perform the calculation
To add a control to the form, drag it from the **Toolbox** onto the form.
**Coding the calculator's functionality**
The next step is to code the calculator's functionality. We will need to write code for the following events:
* The **Click** event of the **Button** control
* The **TextChanged** event of the **TextBox** control
The code for the **Click** event of the **Button** control will perform the calculation and update the **Label** control with the result. The code for the **TextChanged** event of the **TextBox** control will check if the user has entered a valid number and will enable or disable the **Button** control accordingly.
**Running the calculator**
Once you have finished coding the calculator, you can run it by pressing **F5**. The calculator will be displayed in a new window. You can enter numbers in the **TextBox** control and click the **Button** control to perform the calculation.
**Conclusion**
In this tutorial, we have learned how to create a simple calculator using vb.net. We covered the following topics:
* Creating a new project
* Adding controls to the form
* Coding the calculator's functionality
* Running the calculator
I hope you found this tutorial helpful. If you have any questions, please feel free to ask in the comments below.
## Hashtags
* #calculator
* #VBNET
* #VisualBasic
* #StepByStep
* #tutorial
**Giới thiệu**
Trong hướng dẫn này, chúng tôi sẽ tìm hiểu cách tạo một máy tính đơn giản bằng VB.NET.Chúng tôi sẽ đề cập đến các chủ đề sau:
* Tạo một dự án mới
* Thêm điều khiển vào biểu mẫu
* Mã hóa chức năng của máy tính
* Chạy máy tính
** Tạo một dự án mới **
Để tạo một dự án mới, hãy mở Visual Studio và chọn tệp ** **> ** MỚI **> ** Dự án **.Trong hộp thoại ** New Project **, chọn ** Visual Basic **> ** Ứng dụng Windows Forms ** và nhấp vào ** OK **.
Điều này sẽ tạo ra một dự án mới có tên ** Máy tính **.Dự án sẽ chứa một biểu mẫu duy nhất gọi là ** Form1 **.
** Thêm điều khiển vào biểu mẫu **
Bước tiếp theo là thêm các điều khiển vào biểu mẫu mà chúng ta cần cho máy tính.Chúng tôi sẽ cần các điều khiển sau:
* Một điều khiển nhãn để hiển thị kết quả của phép tính
* Một điều khiển hộp văn bản để nhập các số
* Điều khiển nút để thực hiện tính toán
Để thêm điều khiển vào biểu mẫu, hãy kéo nó từ hộp công cụ ** ** vào biểu mẫu.
** Mã hóa chức năng của máy tính **
Bước tiếp theo là mã hóa chức năng của máy tính.Chúng ta sẽ cần viết mã cho các sự kiện sau:
*Nhấp vào ** sự kiện của nút ** ** điều khiển
*Sự kiện ** textChanged ** của điều khiển hộp văn bản ** **
Mã cho sự kiện ** Nhấp vào ** của nút ** ** điều khiển sẽ thực hiện tính toán và cập nhật điều khiển nhãn ** ** với kết quả.Mã cho sự kiện ** TextChanged ** của điều khiển TextBox ** ** sẽ kiểm tra xem người dùng đã nhập một số hợp lệ và sẽ bật hoặc vô hiệu hóa nút ** ** điều khiển phù hợp.
** Chạy máy tính **
Khi bạn đã hoàn thành mã hóa máy tính, bạn có thể chạy nó bằng cách nhấn ** F5 **.Máy tính sẽ được hiển thị trong một cửa sổ mới.Bạn có thể nhập số vào điều khiển ** Textbox ** và nhấp vào nút ** ** Điều khiển để thực hiện tính toán.
**Phần kết luận**
Trong hướng dẫn này, chúng tôi đã học cách tạo một máy tính đơn giản bằng VB.NET.Chúng tôi đề cập đến các chủ đề sau:
* Tạo một dự án mới
* Thêm điều khiển vào biểu mẫu
* Mã hóa chức năng của máy tính
* Chạy máy tính
Tôi hy vọng bạn tìm thấy hướng dẫn này hữu ích.Nếu bạn có bất kỳ câu hỏi, xin vui lòng hỏi trong các ý kiến dưới đây.
## hashtags
* #máy tính
* #VBNET
* #ngôn ngữ lập trình
* #từng bước một
* #tutorial
=======================================
#calculator #VBNET #VisualBasic #StepByStep #tutorial ## Calculator using vb.net - Step by step
**Introduction**
In this tutorial, we will learn how to create a simple calculator using vb.net. We will cover the following topics:
* Creating a new project
* Adding controls to the form
* Coding the calculator's functionality
* Running the calculator
**Creating a new project**
To create a new project, open Visual Studio and select **File** > **New** > **Project**. In the **New Project** dialog box, select **Visual Basic** > **Windows Forms Application** and click **OK**.
This will create a new project called **Calculator**. The project will contain a single form called **Form1**.
**Adding controls to the form**
The next step is to add the controls to the form that we need for the calculator. We will need the following controls:
* A Label control to display the result of the calculation
* A TextBox control to enter the numbers
* A Button control to perform the calculation
To add a control to the form, drag it from the **Toolbox** onto the form.
**Coding the calculator's functionality**
The next step is to code the calculator's functionality. We will need to write code for the following events:
* The **Click** event of the **Button** control
* The **TextChanged** event of the **TextBox** control
The code for the **Click** event of the **Button** control will perform the calculation and update the **Label** control with the result. The code for the **TextChanged** event of the **TextBox** control will check if the user has entered a valid number and will enable or disable the **Button** control accordingly.
**Running the calculator**
Once you have finished coding the calculator, you can run it by pressing **F5**. The calculator will be displayed in a new window. You can enter numbers in the **TextBox** control and click the **Button** control to perform the calculation.
**Conclusion**
In this tutorial, we have learned how to create a simple calculator using vb.net. We covered the following topics:
* Creating a new project
* Adding controls to the form
* Coding the calculator's functionality
* Running the calculator
I hope you found this tutorial helpful. If you have any questions, please feel free to ask in the comments below.
## Hashtags
* #calculator
* #VBNET
* #VisualBasic
* #StepByStep
* #tutorial