Share Cách sử dụng Trình duyệt Tor với Freenet trên Debian 11

Gologin

Well-known member
** Cách sử dụng trình duyệt Tor với Freenet trên Debian 11 **

** Hashtags: **

* #Tor
* #Freenet
* #Debian
* #Sự riêng tư
* #bảo vệ

**Giới thiệu**

TOR là một phần mềm miễn phí và nguồn mở cho phép bạn duyệt mạng ẩn danh.Nó thực hiện điều này bằng cách định tuyến lưu lượng truy cập của bạn thông qua một loạt các máy chủ chạy tình nguyện, điều đó có nghĩa là địa chỉ IP thực sự của bạn bị ẩn khỏi các trang web bạn truy cập.Freenet là một mạng ngang hàng phi tập trung cho phép bạn chia sẻ các tệp và liên lạc với những người khác một cách ẩn danh.Nó không phải chịu sự kiểm duyệt hoặc giám sát, và nó có thể được sử dụng để truy cập nội dung bị chặn ở quốc gia của bạn.

Trong hướng dẫn này, chúng tôi sẽ chỉ cho bạn cách cài đặt và sử dụng trình duyệt Tor với Freenet trên Debian 11.

** Điều kiện tiên quyết **

Để làm theo hướng dẫn này, bạn sẽ cần những điều sau đây:

* Hệ thống Debian 11
* Một kết nối internet hoạt động
* Trình duyệt tor
* Phần mềm freenet

** Cài đặt trình duyệt tor **

Trình duyệt Tor có sẵn dưới dạng gói Debian.Để cài đặt nó, hãy mở một thiết bị đầu cuối và chạy lệnh sau:

`` `
sudo apt install tor trình duyệt
`` `

Khi trình duyệt TOR được cài đặt, bạn có thể khởi động nó bằng cách chạy lệnh sau:

`` `
Trình duyệt tor
`` `

Trình duyệt Tor sẽ bắt đầu và bạn sẽ được trình bày với màn hình sau:

! [Màn hình bắt đầu trình duyệt Tor] ( )

** Cài đặt phần mềm Freenet **

Phần mềm Freenet có sẵn dưới dạng gói Debian.Để cài đặt nó, hãy mở một thiết bị đầu cuối và chạy lệnh sau:

`` `
sudo apt cài đặt freenet
`` `

Khi phần mềm Freenet được cài đặt, bạn có thể bắt đầu bằng cách chạy lệnh sau:

`` `
Freenet
`` `

Phần mềm Freenet sẽ bắt đầu và bạn sẽ được trình bày với màn hình sau:

! [Màn hình bắt đầu Freenet] ( )

** Sử dụng trình duyệt tor với freenet **

Khi bạn đã cài đặt trình duyệt Tor và phần mềm Freenet, bạn có thể sử dụng chúng cùng nhau để duyệt Internet ẩn danh và truy cập nội dung bị chặn ở quốc gia của bạn.

Để thực hiện việc này, hãy mở trình duyệt TOR và nhấp vào nút "Kết nối".

Khi bạn được kết nối với mạng Tor, bạn có thể mở phần mềm Freenet.

Phần mềm Freenet sẽ kết nối với mạng Freenet và bạn sẽ có thể truy cập nội dung bị chặn ở quốc gia của bạn.

**Phần kết luận**

Trong hướng dẫn này, chúng tôi đã chỉ cho bạn cách cài đặt và sử dụng trình duyệt Tor với Freenet trên Debian 11. Chúng tôi hy vọng rằng bạn thấy hướng dẫn này hữu ích.

**Người giới thiệu**

* [TOR] (The Tor Project | Privacy & Freedom Online)
* [Freenet] (Hyphanet)
* [Debian] (Debian -- The Universal Operating System)
=======================================
**How to Use the Tor Browser with Freenet on Debian 11**

**Hashtags:**

* #Tor
* #Freenet
* #Debian
* #Privacy
* #Security

**Introduction**

Tor is a free and open-source software that allows you to browse the internet anonymously. It does this by routing your traffic through a series of volunteer-run servers, which means that your real IP address is hidden from the websites you visit. Freenet is a decentralized peer-to-peer network that allows you to share files and communicate with others anonymously. It is not subject to censorship or surveillance, and it can be used to access content that is blocked in your country.

In this tutorial, we will show you how to install and use the Tor browser with Freenet on Debian 11.

**Prerequisites**

To follow this tutorial, you will need the following:

* A Debian 11 system
* A working internet connection
* The Tor browser
* The Freenet software

**Installing the Tor browser**

The Tor browser is available as a Debian package. To install it, open a terminal and run the following command:

```
sudo apt install tor-browser
```

Once the Tor browser is installed, you can start it by running the following command:

```
tor-browser
```

The Tor browser will start and you will be presented with the following screen:

![Tor browser start screen](https://i.imgur.com/341040Q.png)

**Installing the Freenet software**

The Freenet software is available as a Debian package. To install it, open a terminal and run the following command:

```
sudo apt install freenet
```

Once the Freenet software is installed, you can start it by running the following command:

```
freenet
```

The Freenet software will start and you will be presented with the following screen:

![Freenet start screen](https://i.imgur.com/042166y.png)

**Using the Tor browser with Freenet**

Once you have installed the Tor browser and the Freenet software, you can use them together to browse the internet anonymously and access content that is blocked in your country.

To do this, open the Tor browser and click on the "Connect" button.

Once you are connected to the Tor network, you can open the Freenet software.

The Freenet software will connect to the Freenet network and you will be able to access content that is blocked in your country.

**Conclusion**

In this tutorial, we showed you how to install and use the Tor browser with Freenet on Debian 11. We hope that you found this tutorial helpful.

**References**

* [Tor](https://www.torproject.org/)
* [Freenet](https://freenetproject.org/)
* [Debian](https://www.debian.org/)
 
Join Telegram ToolsKiemTrieuDoGroup
Back
Top