Review 1 x 11 Tank Tee with UNION Kit Installation Water Well Pressure Tank with SQUARE D 40/60 pressure switch NO LEAD

1 x 11 Tank Tee with UNION Kit Installation Water Well Pressure Tank with SQUARE D 40/60 pressure switch NO LEAD

[Đặt Hàng Ngay Hôm Nay để Nhận Quà Tặng Đặc Biệt!]: (https://shorten.asia/Qs1fuXgy)
** 1-1/4 "TEE TEE với bộ dụng cụ cài đặt: Bể áp lực giếng nước với công tắc áp suất D 40/60 (không có chì) **

** Hashtags: ** #waterwell #PressureTank #pressureswitch

**Giới thiệu:**

Bài viết này sẽ thảo luận về việc lắp đặt tee bể 1-1/4 "với bộ cho bể áp suất giếng nước. Bộ này bao gồm công tắc áp suất, van kiểm tra và đồng hồ đo áp suất. Chúng tôi cũng sẽ thảo luận về tầm quan trọng của việc sử dụngCông tắc áp lực không chì.

**Hướng dẫn từng bước một:**

1. ** Tắt nguồn cung cấp nước cho ngôi nhà. ** Điều này có thể được thực hiện tại van tắt chính.
2. ** Để nước rút nước từ bể áp suất. ** Điều này có thể được thực hiện bằng cách mở van thoát nước ở dưới cùng của bể.
3. ** Ngắt kết nối đường nước khỏi bể áp suất. ** Điều này có thể được thực hiện bằng cách tháo đai ốc liên minh ở cuối dòng nước.
4. ** Tháo công tắc áp suất cũ. ** Công tắc áp suất được đặt trên đỉnh bể áp suất.Nó được giữ tại chỗ bởi hai ốc vít.
5. ** Cài đặt công tắc áp suất mới. ** Công tắc áp suất mới được cài đặt ở cùng vị trí với công tắc áp suất cũ.Nó được giữ tại chỗ bởi hai ốc vít.
6. ** Kết nối đường nước với bể áp suất. ** Điều này có thể được thực hiện bằng cách vặn vào đai ốc ở cuối dòng nước.
7. ** Bật nguồn cung cấp nước cho ngôi nhà. **
8. ** Kiểm tra hoạt động của công tắc áp suất. ** Công tắc áp suất sẽ bật và tắt khi áp suất nước đạt đến mức mong muốn.

**Lời khuyên:**

* Đảm bảo rằng công tắc áp suất được đánh giá cho áp suất nước chính xác.
* Sử dụng công tắc áp lực không có chì để bảo vệ gia đình của bạn khỏi tiếp xúc với khách hàng tiềm năng.
* Thực hiện theo hướng dẫn của nhà sản xuất để cài đặt công tắc áp suất.

**Phần kết luận:**

Lắp đặt một chiếc xe tăng 1-1/4 "với bộ dụng cụ cho bể áp lực giếng nước là một nhiệm vụ tương đối đơn giản. Bằng cách làm theo các bước trong bài viết này, bạn có thể cài đặt một công tắc áp suất mới một cách an toàn trên bể áp suất giếng nước của bạn.
=======================================
[Đặt Hàng Ngay Hôm Nay để Nhận Quà Tặng Đặc Biệt!]: (https://shorten.asia/Qs1fuXgy)
=======================================
**1-1/4" Tank Tee with Kit Installation: Water Well Pressure Tank with Square D 40/60 Pressure Switch (No Lead)**

**Hashtags:** #waterwell #PressureTank #pressureswitch

**Introduction:**

This article will discuss the installation of a 1-1/4" tank tee with kit for a water well pressure tank. The kit includes a pressure switch, a check valve, and a pressure gauge. We will also discuss the importance of using a lead-free pressure switch.

**Step-by-step instructions:**

1. **Turn off the water supply to the house.** This can be done at the main shut-off valve.
2. **Drain the water from the pressure tank.** This can be done by opening the drain valve on the bottom of the tank.
3. **Disconnect the water line from the pressure tank.** This can be done by unscrewing the union nut on the end of the water line.
4. **Remove the old pressure switch.** The pressure switch is located on the top of the pressure tank. It is held in place by two screws.
5. **Install the new pressure switch.** The new pressure switch is installed in the same location as the old pressure switch. It is held in place by two screws.
6. **Connect the water line to the pressure tank.** This can be done by screwing on the union nut on the end of the water line.
7. **Turn on the water supply to the house.**
8. **Check the operation of the pressure switch.** The pressure switch should turn on and off when the water pressure reaches the desired level.

**Tips:**

* Make sure that the pressure switch is rated for the correct water pressure.
* Use a lead-free pressure switch to protect your family from lead exposure.
* Follow the manufacturer's instructions for installing the pressure switch.

**Conclusion:**

Installing a 1-1/4" tank tee with kit for a water well pressure tank is a relatively simple task. By following the steps in this article, you can safely and effectively install a new pressure switch on your water well pressure tank.
=======================================
[Đặt Mua Ngay để Nhận Ngay Quà Tặng Surprise!]: (https://shorten.asia/Qs1fuXgy)
 
Join Telegram ToolsKiemTrieuDoGroup
Back
Top